Portable Tirewasher

中文

Sitemap

Career

Contact

Products & Services
	Water & Wastewater Filtration System (WetSep)
	On-site Aerobic Wastewater Treatment System
	Portable Tirewasher
	Dust Suppression System (WetDust)
	Recycled Plastic
	Green Roof
	Mosquito Trap
	Recycling Bin
	Renewable Energy
	Biodegradable Plastics

Portable Tirewasher

In construction projects, there will be a heavy traffic flow of trucks continuously entering and exiting the sites. The trucks can carry dirt and mud to roads and highways and so require wheel washing before they leave the job site.

The conventional wheel washing method uses grating and manual washing without handling of the wastewater and sludge, resulting in high maintenance costs.

In order to reduce the labour to handle the cleaning process, all trucks need to be cleaned before leaving the site and to recycle the washing waster. Automatic Tirewashers have been introduced to save the cost for manual cleaning and recycle the water per truck wash.

System Structure

	Sensor for automatic startup The tirewasher is running by a sensor which turns on and off when a vehicle is entering and leaving the premises

Roller mechanism to drive the wheels for a complete washing cycle Water from static nozzles would be able to clean the wheel easily without moving a truck forward and backward

	Automatic system for desludging A built-in drag conveyor belt carries the sludge and scraps the sediment out of the sludge hopper.

Portable and requires minimum time for set up Specially constructed as a single and compact unit, the system can be moved to the desired place by simply lifting using 4 lifting lugs. The equipment can be used immediately simply by connecting the power line.

	Cost-effective Since no specific personnel is needed, water is being used over time. The whole cleaning process takes 45 seconds per vehicle, which minimize the maintenance cost.

Information
Dimentsion of equipment	2200(W) x 5340(L) x 1000(H)
Application vehicle	Large vehicle (Max. width 2800mm)
Operating method	Full automatic operation by mechanical sensor
Spraying water pressure	3-4 kg sq.M
Power source	220V or 380V, 3 phase, 50/60Hz
Power dissipation	15.1kW
Water requirement	About 1 to 3 liters per vehicle

Specification
Time for washing tires (per 1 vehicle of 3 axles truck)	Max. about 45 seconds
Max. treating capacity per hour	60 vehicles/hr
Workers	0 (Fully automated)
Quantity of water	As it is a self circulation type, only additional water is needed per vehicle
Sludge elmination method	Automatic elimination using the sludge conveyor
Secondary environment pollution protection	As it is a self circulation, type, the muddy water is released by drainage. There is no secondary environmental pollution from tire washing.
Weight of equipment	5,800kg